Is it better to mount blinds inside or outside?
If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.
How do you fit blinds to a window?
To install blinds, measure the dimensions for an inside or outside mount and purchase blinds specific to those measurements; attach the brackets using a drill, place the head rail into the brackets, attach the valence to the head rail, and secure the blind wand to complete the process.
How do you hang blinds without brackets?
Place the head rail over the top window trim and center it over the window. Place a bubble level on top of the head rail and position the blind so it remains level on the top window trim. Mark the holes you drilled onto the head rail by placing a screw into each hole then pressing the screws into the wood.
How deep should inside mount blinds be?
Inside – Mounted Vertical Blinds Inside mount blinds are installed inside the window casing or door, or wall to wall in a room. The window casing must be at least 2 3/4″ deep for flush track mount or 3 3/4″ deep for flush vane mount (See diagram above).
Where do you put inside mount blinds?
Inside Mount Installation:
- Measure in from each top corner of the window frame.
- Position the brackets above your markings, and drill pilot holes where the screws should go.
- Screw the brackets into place.
- Install the shade by hooking the headrail into the front of the brackets.
How do you measure for inside mount blinds?
Inside Mount 1) Measure the width inside the window opening at the top, and round down to the nearest 1/8″ measurement. 2) Measure the height inside the window opening from the top of the window opening to the window sill. If your window does not have a sill, measure to the point you would like the blind to reach.