Are vertical blinds easy to install?
Vertical blinds are easy to install. A screwdriver is all that is needed to install your blinds. Or for an easier installation, you can use a cordless screwdriver or a drill with 1/4-inch hex head bit. Before starting, carefully unpack your blinds and mounting hardware.
How does a vertical blind work?
Vertical blinds consist of a series of vertical fabric louvres or slats, which can be twisted to close and obscure the window or opened wide to let in lots of light. The louvres are linked together by a chain and are operated using a cord, positioned at the far right or left of the blind.
Can you cut vertical blind rail to size?
How to shorten vertical blinds? You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place. Do not measure the length of the slats until you have fitted the track.
How hard is it to fit vertical blinds?
Learning how to fit vertical blinds is fairly simple, as long as you follow instructions and work safely. Once you’ve gathered your tools and are ready to begin; you will first need to install the mounting mechanism.
How do you fix a vertical blind rail?
- Step 1 – Measure the blind.
- Step 2 – Remove the headrail by pushing up on the bracket tabs on the backside of the blind.
- Step 3 – Use the lighter to melt an end of the new cord to the old cord.
- Step 4 – Tie a knot at the end of the new cord so it won’t pull through the blind.
How do you cut a vertical blind headrail?
Cutting down the headrail Measure in the distance you would like to cut and mark a line. Remove the end stiffener from the headrail. With the tin snips or hacksaw, carefully cut the headrail along the mark you made. Bend the ends of the headrail back out into position with pliers or a screw driver.